Skip to content
naulon
Not checkedNot checked for notices yet.

High Efficient Transparent TiO2 Nanotube Dye-Sensitized Solar Cells: Adhesion of TiO2 Nanotube Membrane to FTO by Two Different Methods

F. Mohammadpour, M. Moradi

Journal of Nanostructures · 2015

doi:10.7508/jns.2015.01.008 (opens in a new tab)

We email you when a new notice or a question about this paper appears.

Abstract

In order to fabricate transparent TiO2 nanotube dye-sensitized solar cells, anodically growth nanotube membranes are detached from Ti substrate by a re-anodization method. The membranes are transferred on FTO glass by two different methods. At the first one, 100mM Ti-isopropoxide is used to make TiO2 nanoparticles for adhering TiO2 nanotube membranes to FTO and in the second one a commercial TiO2 nanoparticle paste is used as connector material. In order to investigate the effect of annealing temperature on the crystallinity of the photoanodes, they were annealed in temperatures from 350 to 650°C. All of the annealed photoanodes show high crystallinty and pure anatase phase in both cases. However nanoprticles with large diameter about 500nm and no homogeneity of dispersion of them at the first method leads to week interconnection between membranes and FTO glasses but good interconnection at the second method leads to high power conversion efficiency of 6.13% under 1 sun illumination without any extra treatment.

Abstract licence: CC BY

Reads

Read by people on this page

None yet.

Checked or read by AI through naulon

None yet.

A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.

Are you an author?

Is this your paper?

Claim it to add your note and be paid when agents cite it. Free.