Skip to content
naulon

Not checkedNot checked for notices yet.

DATUM FEATURE EXTRACTION AND DEFORMATION ANALYSIS METHOD BASED ON NORMAL VECTOR OF POINT CLOUD

W. Sun, J. Wang, F. Jin and 3 more

The International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences · 2018

doi:10.5194/isprs-archives-xlii-3-1601-2018 (opens in a new tab)

We email you when a new notice or a question about this paper appears.

Abstract

In order to solve the problem lacking applicable analysis method in the application of three-dimensional laser scanning technology to the field of deformation monitoring, an efficient method extracting datum feature and analysing deformation based on normal vector of point cloud was proposed. Firstly, the kd-tree is used to establish the topological relation. Datum points are detected by tracking the normal vector of point cloud determined by the normal vector of local planar. Then, the cubic B-spline curve fitting is performed on the datum points. Finally, datum elevation and the inclination angle of the radial point are calculated according to the fitted curve and then the deformation information was analyzed. The proposed approach was verified on real large-scale tank data set captured with terrestrial laser scanner in a chemical plant. The results show that the method could obtain the entire information of the monitor object quickly and comprehensively, and reflect accurately the datum feature deformation.

Abstract licence: CC BY

Reads

Read by people on this page

None yet.

Checked or read by AI through naulon

None yet.

A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.

Are you an author?

Is this your paper?

Claim it to add your note and be paid when agents cite it. Free.