Skip to content
naulon

Not checkedNot checked for notices yet.

SHUTTER-LESS TEMPERATURE-DEPENDENT CORRECTION FOR UNCOOLED THERMAL CAMERA UNDER FAST CHANGING FPA TEMPERATURE

D. Lin, P. Westfeld, H.-G. Maas

The International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences · 2017

doi:10.5194/isprs-archives-xlii-1-w1-619-2017 (opens in a new tab)

We email you when a new notice or a question about this paper appears.

Abstract

Conventional temperature-dependant correction methods for uncooled cameras are not so valid for images under the condition of fast changing FPA temperature as usual, therefore, a shutter-less temperature-dependant correction method is proposed here to compensate for these errors and stabilize camera's response only related to the object surface temperature. Firstly, sequential images are divided into the following three categories according to the changing speed of FPA temperature: stable (0°C/min), relatively stable (<0.5°C/min), unstable (>0.5°C/min). Then all of the images are projected into the same level using a second order polynomial relation between FPA temperatures and gray values from stable images. Next, a third order polynomial relation between temporal differences of FPA temperatures and the above corrected images is implemented to eliminate the deviation caused by fast changing FPA temperature. Finally, radiometric calibration is applied to convert image gray values into object temperature values. Experiment results show that our method is more effective for fast changing FPA temperature data than FLIR GEV.

Abstract licence: CC BY

Reads

Read by people on this page

None yet.

Checked or read by AI through naulon

None yet.

A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.

Are you an author?

Is this your paper?

Claim it to add your note and be paid when agents cite it. Free.