Injection Properties According to the Inner Shape of Metal Additive Layer Manufactured Coaxial Injectors
J. Ahn, K. Ahn, H. Y. Lim
Journal of Applied Fluid Mechanics · 2022
doi:10.47176/jafm.15.04.1027 (opens in a new tab)
We email you when a new notice or a question about this paper appears.
Abstract
The application of three-dimensional (3D) printing technology in rocket engine development has numerous benefits considering cost and time. Among the various techniques of 3D printing, the selective laser melting method has the advantage of being able to manufacture complex structures and process multiple materials. In this study, five types of coaxial injectors with different internal configurations were manufactured using metal 3D printing. To confirm the atomization and mixing performance according to the structure of each injector's oxidizer and fuel post, a cold flow test using water and air was performed under a wide range of experimental conditions. As a result of analyzing the injection pressure drop, discharge coefficient, spray pattern, breakup length, and spray angle, the shape of the oxidizer post had a significant influence on the performance of the injector. In comparison, the effect of the fuel post structure was relatively small; however, there was a meaningful difference in the breakup length and spray angle depending on the direction of rotation.
Abstract licence: CC BY-NC-ND
Reads
Read by people on this page
None yet.
Checked or read by AI through naulon
None yet.
A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.
Are you an author?
Is this your paper?
Claim it to add your note and be paid when agents cite it. Free.