Not checkedNot checked for notices yet.
The Effect of Ejectors on Reduction of Indoor Air Pollution in the Welding Room
Sattar Yunus, Makmur Saini, Rizal Sultan, Rusdi Nur and Ibrahim
Nature Environment and Pollution Technology · 2020
doi:10.46488/nept.2020.v19i04.039 (opens in a new tab)
We email you when a new notice or a question about this paper appears.
Abstract
In this study, the ejector installation has been designed and processed according to the plan and further investigated the effect of the ejector’s performance on reducing air pollutants in a welding chamber. This is done after gas and dust particles appear during the welding process. The measurement of air pollutants was carried out in two conditions. The first condition during the welding process was without using the ejector and the second condition is when the welding process continues and the ejector runs simultaneously. The measurements were made for carbon monoxide (CO) gas, nitrogen monoxide (NO) gas and total suspended particles. The ambient gas sampler was used in measuring CO and NO gases, while the Staflex air sampler measures dust particles. The results show that when the ejector is run or in the second condition, carbon monoxide and nitrogen monoxide and total dust particles are lower in concentration compared to the situation when the ejector is not running.
Abstract licence: CC BY
Reads
Read by people on this page
None yet.
Checked or read by AI through naulon
None yet.
A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.
Are you an author?
Is this your paper?
Claim it to add your note and be paid when agents cite it. Free.