WAMS Based Damping Control of Inter-area Oscillations Employing Energy Storage System
MA, J., WANG, T., THORP, J. S. and 3 more
Advances in Electrical and Computer Engineering · 2012
doi:10.4316/aece.2012.02006 (opens in a new tab)
We email you when a new notice or a question about this paper appears.
Abstract
This paper presents a systematic design procedure for a wide-area damping controller (WADC) employing Energy Storage Systems (ESSs). The WADC is aimed at enhancing the damping of multiple inter-area modes in a large scale power system. Firstly, geometric measures of controllability and obsevability are used to select the control locations for ESSs and most effective stabilizing signals, respectively. Then, the WADC coordinates these signals to achieve multiple-input-multiple-output (MIMO) controllers with the least Frobenius norm feedback gain matrix. The simulation results of frequency and time domains verify the effectiveness of the wide-area damping controller for various operating conditions. Furthermore, the robustness of the wide-area damping controller is also tested with respect to time delay and uncertainty of models.
Abstract licence: CC BY-NC-ND
References24
24 more references, whose wording the paper’s licence keeps private.
Reads
Read by people on this page
None yet.
Checked or read by AI through naulon
None yet.
A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.
Are you an author?
Is this your paper?
Claim it to add your note and be paid when agents cite it. Free.