Skip to content
naulon
Not checkedNot checked for notices yet.

Determination of the water diffusivity of horticultural substrates: comparison of different approaches for the one-step outflow data analysis

Carlo Bibbiani, Carlo A. Campiotti, Luca Incrocci and 1 more

Journal of Agricultural Engineering · 2014

doi:10.4081/jae.2013.219 (opens in a new tab)

We email you when a new notice or a question about this paper appears.

Abstract

The improved iterative method for the simultaneous determination of the hydraulic properties of growing media from one-step experiment by Bibbiani, was performed on pure peat, pure pumice, and peat/pumice (1peat:1pumice by volume) mix, and compared with simplified equations by Valiantzas and Londra, who set up a new two-point method for calculating the water diffusivity, and with Van Genuchten- Mualem model. Brooks and Corey equations for water retention and hydraulic conductivity characterized the hydraulic properties of the porous media in relation to the iterative procedure. In the present work, the estimated water retention curves are compared with nine experimental data, and with the estimation of the Van Genuchten- Mualem model, via the RETC code, taking into account retention and diffusivity data. Bibbiani’s and Van Genuchten-Mualem’s estimations overlap except for the very wet range near saturation (R<sup>2</sup> equals to 0.9997, 0.9999, 0.9998 for pure pumice, 1peat:1pumice mix, and pure peat respectively, for Bibbiani’s estimation; R<sup>2</sup> equals to 0.9923, 0.9541, 0.9993 for pure pumice, 1peat:1pumice mix, and pure peat respectively, for Van Genuchten-Mualem’s estimation), whereas the Valiantzas and Londra’s procedure didn’t get satisfactory results, apparently because of different requirements related to the final pressure head applied in one-step experiment. In regard to diffusivity, a good similarity between Bibbiani’s and Van Genuchten-Mualem’s curves can be assessed, being the mean ratio values of the D(θ) from Valiantzas equation divided by D(θ) from Bibbiani equation equal to 1.20, 1.10, and 1.31 for pure pumice, 1peat:1pumice mix, and pure peat respectively, while Valiantzas and Londra’s procedure generally results in higher values. Due to the lack of estimation of the water retention curve, Valiantzas and Londra’s procedure fails to estimate the hydraulic conductivity function, whereas Bibbiani’s and Van Genuchten-Mualem’s curves match together in most cases.

Abstract licence: CC BY-NC

Reads

Read by people on this page

None yet.

Checked or read by AI through naulon

None yet.

A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.

Are you an author?

Is this your paper?

Claim it to add your note and be paid when agents cite it. Free.