Alkali-activated slag mortars reinforced with ar glassfibre. Performance and properties

In light of the practical problem posed by the high drying shrinkage rate exhibited by alkali-activated slag (AAS),due to these materials exhibited a high drying shrinkage the present study analyzes the behaviour of alkali-activated slag mortars reinforced with alkali-resistant (AR) glass fiber especially designed to reduce drying shrink aging cementitious systems. To this end, both alkali-activated slag and reference Portland cement mortars were prepared, with and without AR fiber (in dosages ranging from 0 to 1.1% by weight of the binder). These mortars were subjected to the following tests: drying shrinkage,mechanical strength after 2, 7 and 28 days, toughness,and high temperature. The microstructure of the materials was also studied by SEM/EDX techniques. At a percentage of 0.22%, AR fiber was found to induce a significant reduction (over 20%) in drying shrinkage, without detracting from the fine resistance strength, of alkali activated slag mortar. Moreover, plain activated slag mortars recovered 20% of their initial mechanical strength after exposure to high temperatures, and ins specimens reinforced with glass fiber at a rate of 0.22%,recovery climbed to 50%.

Abstract licence: CC BY

10 more references, whose wording the paper’s licence keeps private.

A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.