Skip to content
naulon
Not checkedNot checked for notices yet.

Predicting time to failure in bending of wood particleboards under cyclic humidity conditions

J. I. Fernández-Golfín Seco, M. R. Díez Barra

Materiales de Construccion · 1992

doi:10.3989/mc.1992.v42.i225.719 (opens in a new tab)

We email you when a new notice or a question about this paper appears.

Abstract

Time to failure tests under constant load (30, 40, 50 and 60 % stress levels) were conducted on four different 19 mm thick particleboards with three layers. Two of them were uncoated (UF and MUF bonded) and the rest were melamine (80 g/m2) and veneer (Mukally) overlaid. Tests were carried out in cyclic humidity conditions (30 % - 90 %), at 20º C, 7 days at each condition. Time to failure was recorded, fitting mathematical models to predict time to failure. Melamine coating reduces predicting errors and increases time to failure.

Abstract licence: CC BY

Reads

Read by people on this page

None yet.

Checked or read by AI through naulon

None yet.

A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.

Are you an author?

Is this your paper?

Claim it to add your note and be paid when agents cite it. Free.