Skip to content
naulon
Not checkedNot checked for notices yet.

Rheological Modelling of Plaster Deposition for Painting Restoration

Baldino N., Seta L., Migliori M. and 3 more

Applied Rheology · 2010

doi:10.3933/applrheol-20-23310 (opens in a new tab)

We email you when a new notice or a question about this paper appears.

Abstract

This paper reports on the result of rheological modelling of plaster deposition for paintings restoration. A typical plaster recipe was changed in order to check the effect of water level on rheological properties, both performing oscillatory tests and measuring plaster viscosity at two different temperatures. A model based on momentum balance on a vessel-nozzle geometry for a shear thinning fluid was set-up to simulate the deposition process and numerical results were compared to experimental data. A good agreement was found for moderate deposition times. At high process time, due to phase-separation in plaster, a loss in matching between the simulation and experimental point was found, because the modelling assumption of “pseudo-homogeneous” behaviour does not apply anymore. Simulations allowed operating charts to be prepared reporting the deposited plaster volume as a function of the main process variables (temperature and pressure) and rheological properties of the plaster. This model could effectively support the development of an automatic deposition system able to recognise the filling volume over the painting surface and to control autonomously feeding of the plaster from a vessel through the deposition nozzle.

Abstract licence: CC BY

Reads

Read by people on this page

None yet.

Checked or read by AI through naulon

None yet.

A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.

Are you an author?

Is this your paper?

Claim it to add your note and be paid when agents cite it. Free.