Skip to content
naulon
Not checkedNot checked for notices yet.

Analysis of energy demand for low-energy multi-dwelling buildings of different configuration / Skirtingos konfigūracijos mažaenergių daugiabučių pastatų energijos poreikių tyrimas

Giedrė Streckienė, Elena Polonis

Mokslas: Lietuvos Ateitis · 2014

doi:10.3846/mla.2014.57 (opens in a new tab)

We email you when a new notice or a question about this paper appears.

Abstract

To meet the goals established by Directive 2010/31/EU of the European Parliament and of the Council on the energy performance of buildings, the topics of energy efficiency in new and old buildings must be solved. Research and development of new energy solutions and technology are necessary for increasing energy performance of buildings. Three low-energy multi-dwelling buildings have been modelled and analyzed in the presented study. All multi-dwelling houses are made of similar single-family house cells. However, multi-dwelling buildings are of different geometry, flat number and height. DesignBuilder software was used for simulating and determining heating, cooling and electricity demand for buildings. Three different materials (silicate, ceramic and clay concrete blocks) as bearing constructions of external walls have been analyzed. To decrease cooling demand for buildings, the possibility of mounting internal or external louvers has been considered. Primary energy savings for multi-dwelling buildings using passive solar measures have been determined. Santrauka Norint pasiekti Europos Sąjungos direktyvos 2010/31/EB tikslus dėl pastatų energinio naudingumo, reikia spręsti energijos efektyvumo klausimus naujų ir esamų pastatų srityje. Naujų energinių sprendinių ir technologijų tyrimai bei plėtra būtini norint padidinti pastatų energinį naudingumą. Šiame tyrime modeliuojami ir analizuojami trys mažaenergiai daugiabučiai pastatai. Visi jie sudaryti iš vienodo dydžio butų, tačiau pastatai tarpusavyje skiriasi geometrija, butų skaičiumi ir aukštingumu. Siekiant nustatyti ir išnagrinėti pastatų šilumos, vėsos ir elektros energijos poreikius, naudotasi DesignBuilder programa. Visų daugiabučių pastatų atvejais nagrinėjamos trys skirtingos išorės sienų laikančiųjų konstrukcijų medžiagos: silikatiniai, keraminiai ir keramzitbetonio blokeliai. Siekiant sumažinti vėsos poreikį pastatuose taip pat buvo analizuojama galimybė sumontuoti vidines arba išorines žaliuzes. Nustatyti sutaupytieji pirminės energijos kiekiai daugiabučių pastatų atvejams taikant pasyviąsias apsaugos nuo saulės priemones. Reikšminiai žodžiai: mažaenergis daugiabutis pastatas; DesigBuilder; modeliavimas; pirminė energija; vidinės ir išorinės žaliuzės.

Abstract licence: CC BY

Reads

Read by people on this page

None yet.

Checked or read by AI through naulon

None yet.

A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.

Are you an author?

Is this your paper?

Claim it to add your note and be paid when agents cite it. Free.