Skip to content
naulon
Not checkedNot checked for notices yet.

Possibilities of using sulphur and plant origin waste for light-weight and thermal insulation construction composites

Gediminas Marčiukaitis, Gintaras Jurkėnas

Journal of Environmental Engineering and Landscape Management · 2013

doi:10.3846/16486897.2013.767805 (opens in a new tab)

We email you when a new notice or a question about this paper appears.

Abstract

The article notes that not all types of plant origin waste are appropriate for being used as fuel or left for decay. The environment is polluted by noxious gas that is generated in the process of heating or decaying. Sulphur waste is produced at chemical and oil industry plants as well as during the treatment of emissions resulting from fuel combustion. Thermal energy is produced in the process of combusting plant origin waste; however, the emitted fumes are pollutants. A much more effective way for the use of this waste is proposed, i.e. to produce and use a new type of thermal insulation construction composites that would allow long-term heat saving buildings. The performed tests covered the properties of components and the influence of plasticisers on the plasticity and compressive strength of hardened sulphur. The common behaviour of sulphur and plant origin waste – sawdust, boon, straw – in composite was also analysed. All the properties necessary for thermal insulation materials were identified – compressibility, compression and bending strength, thermal conductivity. They have the same value as other classical thermal insulation materials.

Abstract licence: CC BY

Reads

Read by people on this page

None yet.

Checked or read by AI through naulon

None yet.

A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.

Are you an author?

Is this your paper?

Claim it to add your note and be paid when agents cite it. Free.