Skip to content
naulon
Not checkedNot checked for notices yet.

Separation of Copper from Acidic Etching Solutions

Martina UJHÁZY, Vladimír ČABLÍK, Hong N. VU and 1 more

GeoScience Engineering · 2022

doi:10.35180/gse-2022-0079 (opens in a new tab)

We email you when a new notice or a question about this paper appears.

Abstract

This study deals with the issue of copper separation from acidic etching solutions formed during the process of production of printed circuit boards (PCBs) for the electrical and electronic industries. The article describes the selected methods of copper separation and summarizes the results of an experiment, in which the efficiency of copper recovery from the depleted acid solutions by the cementation and precipitation method was verified. In the process of cementation, iron in the form of metallic swarf was used as a precipitant. To verify the efficiency of the precipitation method, CaCO3 limestone, Ca(OH)2 calcium hydroxide and NaOH solution were used. During the measurement, the amount of Cu in the solution was observed for both methods in dependence on time, temperature, and pH.

Abstract licence: CC BY

Reads

Read by people on this page

None yet.

Checked or read by AI through naulon

None yet.

A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.

Are you an author?

Is this your paper?

Claim it to add your note and be paid when agents cite it. Free.