Analisis Defect dengan Metode Fault Tree Analysis dan Failure Mode Effect Analysis
Evan Nugraha, Rini Mulyani Sari
Organum · 2019
doi:10.35138/organum.v2i2.58 (opens in a new tab)
We email you when a new notice or a question about this paper appears.
Abstract
There was a phenomenon that occurred in garment companies, namely the existence of defect products in the production process. In the sewing process, defects occurred with an average percentage of 6,67% in the first three months of early 2019. This 6,67% was a percentage of disability that exceeded the company percentage limit of 5%, thus disrupting the production process. The primary purposed of analyzing the factors of product defects was to find out the causes and solutions to the company. The Fault Tree Analysis method was used to find out the root caused of product defects. Three main problems caused product defects, namely 1) untidy stitches, 2) stitches that exceeded the specified size, and 3) straightened stitches. By using the Failure Mode Effect Analysis method, the three problems were caused by human error and the absence of a Standard Operating Procedure in the production process. As a solution to problems in the company, the Risk Priority Number value was used. From this study the result obtained 1 Risk Priority Number value is the proposed improvement.
Abstract licence: CC BY-SA
Reads
Read by people on this page
None yet.
Checked or read by AI through naulon
None yet.
A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.
Are you an author?
Is this your paper?
Claim it to add your note and be paid when agents cite it. Free.