Sub-ppm Formaldehyde Detection by n - n TiO 2 @SnO 2 Nanocomposites

Formaldehyde (HCHO) is an important indicator of indoor air quality and one of the markers for detecting lung cancer. Both medical and air quality applications require the detection of formaldehyde in the sub-ppm range. Nanocomposites SnO₂/TiO₂ are promising candidates for HCHO detection, both in dark conditions and under UV illumination. Nanocomposites TiO₂@SnO₂ were synthesized by ALD method using nanocrystalline SnO₂ powder as a substrate for TiO₂ layer growth. The microstructure and composition of the samples were characterized by ICP-MS, TEM, XRD and Raman spectroscopy methods. The active surface sites were investigated using FTIR and TPR-H₂ methods. The mechanism of formaldehyde oxidation on the surface of semiconductor oxides was studied by in situ DRIFTS method. The sensor properties of nanocrystalline SnO₂ and TiO₂@SnO₂ nanocomposites toward formaldehyde (0.06&#8722;0.6 ppm) were studied by in situ electrical conductivity measurements in dark conditions and under periodic UV illumination at 50&#8722;300 &#176;C. Nanocomposites TiO₂@SnO₂ exhibit a higher sensor signal than SnO₂ and a decrease in the optimal measurement temperature by 50 &#176;C. This result is explained based on the model considering the formation of <i>n</i>-<i>n</i> heterocontact at the SnO₂/TiO₂ interface. UV illumination leads to a decrease in sensor response compared with that obtained in dark conditions because of the photodesorption of oxygen involved in the oxidation of formaldehyde.

Abstract licence: CC BY

A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.