Radiation-Resistant Er3+-Doped Superfluorescent Fiber Sources

The radiation effects of three Er3+-doped superfluorescent fiber sources (SFSs), which are based on three segments of Er-doped fibers with different lengths, are studied experimentally. We observed that the radiation-induced attenuation of the signal light of the 1530 nm band for an SFS is less than that of the 1560 nm band. Thus, the trimming technique of the Gauss-like spectra is investigated to reduce the mean wavelength drift. A filter was customized and used in superfluorescent fiber sources. To further reduce output power loss, the method with feedback control of pump power was adopted in the SFS. Then, the trimming spectral SFS with pump feedback control was tested under irradiation environment at the dose rate of 2.988 Gy/h. The experimental results demonstrate that the mean wavelength drift is <40 ppm and the loss of output power is <0.2 dB under a total dose higher than 1000 Gy. These findings confirm the significance of the method in improving radiation-resistant capabilities of fiber sources under irradiation environments.

Abstract licence: CC BY

A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.