Micro-Nano Carbon Structures with Platelet, Glassy and Tube-Like Morphologies
Mingqiang Liu, Juntong Huang, Qingming Xiong and 5 more
Nanomaterials · 2019
doi:10.3390/nano9091242 (opens in a new tab)
We email you when a new notice or a question about this paper appears.
Abstract
Carbon source precursors for high-grade, clean, and low-carbon refractories were obtained by in situ exfoliation of flake graphite (FG) and phenol−formaldehyde resin (PF) composites with three-roll milling (TRM) for the fabrication of graphite nanoplatelets. In addition, by using Ni(NO<sub>3</sub>)<sub>2</sub>·6H<sub>2</sub>O as a catalyst in the pyrolysis process, multidimensional carbon nanostructures were obtained with coexisting graphite nanoplatelets (GNPs), glassy carbon (GC), and carbon nanotubes (CNTs). The resulting GNPs (exfoliated 16 times) had sizes of 10−30 μm, thicknesses of 30−50 nm, and could be uniformly dispersed in GC from the PF pyrolysis. Moreover, Ni(NO<sub>3</sub>)<sub>2</sub>·6H<sub>2</sub>O played a key role in the formation and growth of CNTs from a catalytic pyrolysis of partial PF with the V−S/tip growth mechanisms. The resulting multidimensional carbon nanostructures with GNPs/GC/CNTs are attributed to the shear force of the TRM process, pyrolysis, and catalytic action of nitrates. This method reduced the production costs of carbon source precursors for low-carbon refractories, and the precursors exhibited excellent performances when fabricated on large scales.
Abstract licence: CC BY
Reads
Read by people on this page
None yet.
Checked or read by AI through naulon
None yet.
A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.
Are you an author?
Is this your paper?
Claim it to add your note and be paid when agents cite it. Free.