Selective Detection of NO and NO2 with CNTs-Based Ionization Sensor Array
Hui Song, Kun Li, Chang Wang
Micromachines · 2018
doi:10.3390/mi9070354 (opens in a new tab)
We email you when a new notice or a question about this paper appears.
Abstract
The accurate detection of NOx is an important issue, because nitrogen oxides are not only environmental pollutants, but also harm to human health. An array composed of two carbon nanotubes (CNTs)-based ionization sensors with different separations is proposed for NO and NO2 selective detection. The experimental results indicate that the CNTs-based ionization sensor has an intrinsic, monotonically decreasing response to NO or NO2. The sensor with 80 µm separations and 100 µm separations exhibited the highest sensitivity of −0.11 nA/ppm to 300 ppm NO and −0.49 nA /ppm to 70 ppm NO2, respectively. Although the effect of the NO2 concentration on the NO response is much stronger than that of NO on NO2, the array of these two sensors still exhibits the ability to simultaneously detect the concentrations of NO and NO2 in a gas mixture without component separation.
Abstract licence: CC BY
Reads
Read by people on this page
None yet.
Checked or read by AI through naulon
None yet.
A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.
Are you an author?
Is this your paper?
Claim it to add your note and be paid when agents cite it. Free.