CMOS-NEMS Copper Switches Monolithically Integrated Using a 65 nm CMOS Technology

This work demonstrates the feasibility to obtain copper nanoelectromechanical (NEMS) relays using a commercial complementary metal oxide semiconductor (CMOS) technology (ST 65 nm) following an intra CMOS-MEMS approach. We report experimental demonstration of contact-mode nano-electromechanical switches obtaining low operating voltage (5.5 V), good ION/IOFF (103) ratio, abrupt subthreshold swing (4.3 mV/decade) and minimum dimensions (3.50 μm × 100 nm × 180 nm, and gap of 100 nm). With these dimensions, the operable Cell area of the switch will be 3.5 μm (length) × 0.2 μm (100 nm width + 100 nm gap) = 0.7 μm2 which is the smallest reported one using a top-down fabrication approach.

Abstract licence: CC BY

A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.