Flexible Tactile Sensor Using Polyurethane Thin Film
Seiji Aoyagi, Tomokazu Takahashi, Masato Suzuki
Micromachines · 2012
doi:10.3390/mi3020315 (opens in a new tab)
We email you when a new notice or a question about this paper appears.
Abstract
A novel capacitive tactile sensor using a polyurethane thin film is proposed in this paper. In previous studies, capacitive tactile sensors generally had an air gap between two electrodes in order to enhance the sensitivity. In this study, there is only polyurethane thin film and no air gap between the electrodes. The sensitivity of this sensor is higher than the previous capacitive tactile sensors because the polyurethane is a fairly flexible elastomer and the film is very thin (about 1 µm). The polyurethane film is formed by spin-coating and etched back from 6 µm to 1 µm using 48% sulfuric acid. As a result of evaluation, the sensitivity of the developed sensor (diameter is 1 mm) is 1.3 pF/Pa (800 pF/N considering the sensing area). Young’s modulus of the thin polyurethane film was estimated to be 20 kPa.
Abstract licence: CC BY
Reads
Read by people on this page
None yet.
Checked or read by AI through naulon
None yet.
A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.
Are you an author?
Is this your paper?
Claim it to add your note and be paid when agents cite it. Free.