Research on Lightweight Design and Indirect Hot Stamping Process of the New Ultra-High Strength Steel Seat Bracket

Aiming at the need for lightweight requirements of the electric bus components, combined with the performance advantages of the hot stamping ultra-high strength steel, a new type of seat bracket structure is proposed. The new structure was analyzed by finite element method and the variable density topology optimization results. Subsequently, the new seat bracket was manufactured by the indirect hot stamping process. The results showed that the new type of seat bracket can reduce the weight by 17.04% after topology optimization, which achieved the goal of lightweight design of the structure. After indirect hot stamping, the bottom of the seat bracket microstructures were mainly martensite and the ultimate tensile strength was about 1560 MPa, the microhardness was equally distributed at about 513.5 HV. Finally, according to the stiffness check test, the seat bracket satisfied the user requirements.

Abstract licence: CC BY

A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.