Manufacturability of Overhanging Holes Using Electron Beam Melting

This study aims to investigate the manufacturability of overhang round holes with and without support. The experiments were conducted by electron beam melting (EBM) using a Ti6Al4V powder. A large number of overhanging holes with and without support were fabricated and evaluated. The geometrical accuracy, mechanical properties, and microstructures were utilized as a measure of the process performance. It was demonstrated that overhanging features can be built successfully without support up to a certain dimension (or threshold value). Beyond that value, a minimal support structure can be employed to achieve the most suitable trade-off between production time, cost, and accuracy.

Abstract licence: CC BY

A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.