Design of U-Geometry Parameters Using Statistical Analysis Techniques in the U-Bending Process

The various U-geometry parameters in the U-bending process result in processing difficulties in the control of the spring-back characteristic. In this study, the effects of U-geometry parameters, including channel width, bend angle, material thickness, tool radius, as well as workpiece length, and their design, were investigated using a combination of finite element method (FEM) simulation, and statistical analysis techniques. Based on stress distribution analyses, the FEM simulation results clearly identified the different bending mechanisms and effects of U-geometry parameters on the spring-back characteristic in the U-bending process, with and without pressure pads. The statistical analyses elucidated that the bend angle and channel width have a major influence in cases with and without pressure pads, respectively. The experiments were carried out to validate the FEM simulation results. Additionally, the FEM simulation results were in agreement with the experimental results, in terms of the bending forces and bending angles.

Abstract licence: CC BY

A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.