Robust Ag-Cu Sintering Bonding at 160 °C via Combining Ag 2 O Microparticle Paste and Pt-Catalyzed Formic Acid Vapor

With the assistance of Pt-catalyzed formic acid vapor, robust Ag-Cu bonding was realized at an ultra-low temperature of 160 °C under 3 MPa for 30 min via the sintering of Ag nanoparticles in situ generated from Ag2O microparticles. The Cu oxide layer at the interface after bonding can be eliminated, which improves the bond strength and electrical conductivity of the joint. A metallic bond contact between the sintered Ag and the Cu substrate is obtained without interfacial solid solution and intermetallic phases, and the shear strength is comparable to previous bonding at a higher temperature. The bonding mechanisms were figured out by comparing the bonding with and without the Pt-catalyzed formic acid vapor. This ultra-low temperature Ag-Cu bonding method may create more flexibilities in the structure design and material selection for power device integration.

Abstract licence: CC BY

A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.