Fabrication of Magnetically Driven Microvalve Arrays Using a Photosensitive Composite

Microvalves play an important role in fluid control in micro total analysis systems (µTAS). Previous studies have reported complex fabrication processes for making microvalve elements in a channel. Hence, there is a need for a simpler microvalve fabrication method for achieving throughput improvement and cost reduction in µTAS. In this study, we propose a simple fabrication method for a magnetically driven microvalve array using a photosensitive composite. The composite was prepared by mixing a photoresist and magnetic particles of pure iron. The simple fabrication process was performed by using a laminating layer composed of a sacrificial part and the composite in a channel. The microvalve elements were fabricated by one-step photolithography using the processability of the sacrificial layer and composite. Further, we demonstrated the magnetic driving property of the fabricated microvalve array device. Compared to devices containing non-driving microvalves, the flow rate was decreased by 50%, and the pressure difference between the inlet and outlet increased by up to 4 kPa with increase in driving microvalve elements. These results imply that our proposed device could be useful for practical µTAS applications.

Abstract licence: CC BY

27 more references, whose wording the paper’s licence keeps private.

A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.