The Study of Mechanical and Tribological Performance of Fulleroid Materials Filled PA 6 Composites
Dmitry V. Pikhurov, Vjacheslav V. Zuev
Lubricants · 2016
doi:10.3390/lubricants4020013 (opens in a new tab)
We email you when a new notice or a question about this paper appears.
Abstract
The effect of fulleroid materials (fullerene С60 and fullerene soot which is used for fullerene production) and carbon fibers on the mechanical and tribological properties of polymer nanocomposites based on polyamide 6 (PA6) was investigated. Composites were synthesized by in situ polymerization and direct mixing in an extruder. It was found that addition of these fillers during in situ polymerization was more effective at improving the mechanical and tribological properties of the composites. The use of the nanoparticles was an effective way to decrease the friction coefficient of the polymer composites because the fillers were the same size as the segments of the surrounding polymer chains. The steady state coefficients of friction with the addition of fulleroid fillers were lower than that of unfilled PA6. The lowest coefficient of friction was observed for PA6 filled with 1 wt. % fullerene soot.
Abstract licence: CC BY
Reads
Read by people on this page
None yet.
Checked or read by AI through naulon
None yet.
A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.
Are you an author?
Is this your paper?
Claim it to add your note and be paid when agents cite it. Free.