Characterization and Production of Fuel Briquettes Made from Biomass and Plastic Wastes

In this study, the physical properties of briquettes produced from two different biomass feedstocks (sawdust and date palm trunk) and different plastic wastes, without using any external binding agent, were investigated. The biomass feedstocks were blended with different ratios of two waste from electrical and electronic equipment (WEEE) plastics (halogen-free wire and printed circuit boards (PCBs)) and automotive shredder residues (ASR). The briquettes production is studied at different waste proportions (10–30%), pressures (22–67 MPa) and temperatures (room–130 °C). Physical properties as density and durability rating were measured, usually increasing with temperature. Palm trunk gave better results than sawdust in most cases, due to its moisture content and the extremely fine particles that are easily obtained.

Abstract licence: CC BY

A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.