Skip to content
naulon

Not checkedNot checked for notices yet.

Fluorescence and Naked-Eye Detection of Pb 2+ in Drinking Water Using a Low-Cost Ionophore Based Sensing Scheme

Aron Hakonen, Niklas Strömberg

Chemosensors · 2018

doi:10.3390/chemosensors6040051 (opens in a new tab)

We email you when a new notice or a question about this paper appears.

Abstract

Drinking water contamination of lead from various environmental sources, leaching consumer products, and intrinsic water-pipe infrastructure is still today a matter of great concern. Therefore, new highly sensitive and convenient Pb<sup>2+</sup> measurement schemes are necessary, especially for in-situ measurements at a low cost. Within this work dye/ionophore/Pb<sup>2+</sup> co-extraction and effective water phase de-colorization was utilized for highly sensitive lead measurements and sub-ppb naked-eye detection. A low-cost ionophore Benzo-18-Crown-6-ether was used, and a simple test-tube mix and separate procedure was developed. Instrumental detection limits were in the low ppt region (LOD = 3, LOQ = 10), and naked-eye detection was 500 ppt. Note, however, that this sensing scheme still has improvement potential as concentrations of fluorophore and ionophore were not optimized. Artificial tap-water samples, leached by a standardized method, demonstrated drinking water application. Implications for this method are convenient in-situ lead ion measurements.

Abstract licence: CC BY

Reads

Read by people on this page

None yet.

Checked or read by AI through naulon

None yet.

A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.

Are you an author?

Is this your paper?

Claim it to add your note and be paid when agents cite it. Free.