Skip to content
naulon
Not checkedNot checked for notices yet.

Battery Surface and Edge Defect Inspection Based on Sub-Regional Gaussian and Moving Average Filter

Haibing Hu, Bo Zhang, Dongjian Xu and 1 more

Applied Sciences · 2019

doi:10.3390/app9163418 (opens in a new tab)

We email you when a new notice or a question about this paper appears.

Abstract

Detecting the defects of a battery on the surface and edge has always been difficult, especially for concave and convex ones, thereby seriously affecting its quality. Thus, sub-regional Gaussian and moving average filtering are innovatively proposed in this study considering the effect of the nonuniform background illumination of the battery edge and the difference between the edge background and the internal surface defects of the battery. The battery surface image is divided into two areas, namely, edge area <inline-formula> <math display="inline"> <semantics> <mrow> <msub> <mi>W</mi> <mn>1</mn> </msub> </mrow> </semantics> </math> </inline-formula> and inner area <inline-formula> <math display="inline"> <semantics> <mrow> <msub> <mi>W</mi> <mn>2</mn> </msub> </mrow> </semantics> </math> </inline-formula>. Gaussian and moving average filtering are carried out row-by-row and column-by-column in the inner area <inline-formula> <math display="inline"> <semantics> <mrow> <msub> <mi>W</mi> <mn>2</mn> </msub> </mrow> </semantics> </math> </inline-formula> and the edge area <inline-formula> <math display="inline"> <semantics> <mrow> <msub> <mi>W</mi> <mn>1</mn> </msub> </mrow> </semantics> </math> </inline-formula>, respectively. The algorithm is tested on 600 battery samples that mainly possess concave and convex defects. The proposed method has higher detection accuracy and lower omission detection rate than the traditional unpartitioned processing method, especially in detecting the accuracy of edge defects. The accuracy rates were approximately 20% higher than that obtained by the traditional processing algorithm. The proposed method has remarkable real-time performance that can process four 8192 &#215; 10,240 pixel battery images per second, thereby meeting the industrial production line speed requirements while satisfying accuracy. The proposed method has been applied in actual production for defect inspection.

Abstract licence: CC BY

Reads

Read by people on this page

None yet.

Checked or read by AI through naulon

None yet.

A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.

Are you an author?

Is this your paper?

Claim it to add your note and be paid when agents cite it. Free.