Relationship between ISO 230-2/-6 Test Results and Positioning Accuracy of Machine Tools Using LaserTRACER

To test the positioning accuracy and repeatability of the linear axes of machine tools, ISO (International Standards Organization) 230-2 and ISO 230-6 are usually adopted. Auto-tracking laser interferometers (ATLI) can perform the testing for the positioning accuracy and the repeatability including x-, y- and z-axes according to ISO 230-2 as well as xy, xz, yz, and xyz diagonal lines following ISO 230-6. LaserTRACER is a kind of ATLI. One of the steps of the ISO 230-2 and -6 tests using LaserTRACER is to determine the coordinate of the LaserTRACER with respect to the home point of the machine tool. Positioning accuracy of the machine tool causes the coordinate determined error, which might influence the test result. To check on this error, this study performs three experiments. The experiment results show that the positioning error appears on the testing results.

Abstract licence: CC BY

A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.