Enhancement of Biodegradable Poly(Ethylene Oxide) Ionic–Polymer Metallic Composite Actuators with Nanocrystalline Cellulose Fillers

Biodegradable ionic polymer metallic composite (IPMC) electroactive polymers (EAPs) were fabricated using poly(ethylene oxide) (PEO) with various concentrations of lithium perchlorate. Nanocrystalline cellulose (NCC) rods created from a sulfuric acid hydrolysis process were added at various concentrations to increase the EAPs’ elastic modulus and improve their electromechanical properties. The electromechanical actuation was studied. PEONCC composites were created from combining a 35-mg/mL aqueous NCC suspension with an aqueous, PEO solution at varying vol.%. Due to an imparted space charge from the hydrolysis process, composites with an added 1.5 vol.% of NCC suspension exhibited an electromechanical tip displacement, strain, and elastic modulus that was 40.7%, 33.4% and 20.1% higher, respectively, than those for PEO IPMCs without NCC. This performance represented an increase of 300% in the energy density of these samples. However, the electromechanical response decreased when the NCC content was high. NCC without the space charge were also tested to verify the analysis. Additionally, the development of new relationships for modeling and evaluating the time-dependent instantaneous tip angular velocity and acceleration was discussed and applied to these IPMCs.

Abstract licence: CC BY

28 more references, whose wording the paper’s licence keeps private.

A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.