Not checkedNot checked for notices yet.
The Effect of Zirconium oxide Nanoparticle on the Surface Roughness of Maxillofacial Silicone
Israa E. Hussein, Radhwan H. Hasan
Al-Rafidain Dental Journal · 2022
doi:10.33899/rdenj.2021.129297.1078 (opens in a new tab)
We email you when a new notice or a question about this paper appears.
Abstract
Aims: The study intended to inspect the consequence of the addition of zirconium oxide (ZrO2) nanoparticle at two concentrations (1% and 1.5% by weight) on the surface roughness of the maxillofacial silicone material (room temperature vulcanized). Materials and methods: Thirty samples were prepared according to the manufacture instructions and divided into three groups (n=10). A digital surface roughness profilometer tested the surface roughness samples for the control group (A) free from nanoparticle, group (B) 1% ZrO2, group (C) 1.5 % ZrO2. Results: The mean values of the surface roughness measured groups a highly significant difference among groups. Group A (.2137 µm) exhibited a highly significant difference compared to group B (.2698 µm) and group C (.2801 µm). Besides, a highly significant difference between group B and group C. Conclusions: Incorporation of 1% and 1.5% by weight of ZrO2 nanoparticle into maxillofacial silicone material increases surface roughness.
Abstract licence: CC BY
Reads
Read by people on this page
None yet.
Checked or read by AI through naulon
None yet.
A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.
Are you an author?
Is this your paper?
Claim it to add your note and be paid when agents cite it. Free.