Automatic control technology of mechanical equipment based on microelectronic sensor signal control
Xiaofeng Wei, Yi Wei
Frontiers in Mechanical Engineering · 2025
doi:10.3389/fmech.2025.1557863 (opens in a new tab)
We email you when a new notice or a question about this paper appears.
Abstract
PurposeThis study is to provide a new method for the development of automatic control technology (ACT) of mechanical equipment and promote its wide application in industrial production, and to explore the ACT of mechanical equipment under the control of microelectronic sensor signal (MSS). The overall design idea of mechanical vibration monitoring system is deeply discussed, and the composition, functional requirements and technical standards of the system are defined.MethodBased on ZigBee protocol and Z-Stack protocol stack, a detailed system design scheme is developed to establish a stable and reliable wireless network model. The signal generator is set to send out standard sinusoidal signals of 5Hz and 10Hz respectively, and this group of signals with different frequencies respectively represents different vibration frequency scenes. The sampling frequency is set to 100Hz.ResultsThe proposed wireless monitoring system achieves a 98.7% success rate in vibration signal acquisition within the 5Hz‐10Hz frequency range. Compared with traditional wired systems, the response delay is reduced by 42.3%. In planetary gearbox fault diagnosis tests, the system reaches a 95.6% accuracy rate in identifying characteristic frequencies. With the increase of signal frequency, the period of the waveform is shortened and the amplitude remains relatively stable. This result not only verifies that the designed system can accurately collect vibration signals at different frequencies, but also further proves the response ability of the system to high-frequency vibration.ConclusionThis study not only provides new methods and technical support for the development of ACT of mechanical equipment, but also provides important reference for the design and implementation of mechanical vibration monitoring system.
Abstract licence: CC BY
Reads
Read by people on this page
None yet.
Checked or read by AI through naulon
None yet.
A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.
Are you an author?
Is this your paper?
Claim it to add your note and be paid when agents cite it. Free.