Skip to content
naulon

Not checkedNot checked for notices yet.

Effect of Rolling Deformation on Creep Properties of FeCrAl Alloys

Huan Sheng Lai, Jingyu Guo, Shanglin Zhang and 4 more

Frontiers in Energy Research · 2021

doi:10.3389/fenrg.2021.663578 (opens in a new tab)

We email you when a new notice or a question about this paper appears.

Abstract

FeCrAl alloy is one of the most promising nuclear fuel claddings among many accident tolerant fuel (ATF) materials due to its excellent oxidation resistance and good mechanical properties. However, the effect of process conditions on the creep properties of the FeCrAl alloy is not clear till now. In this study, the impact of a process condition of hot-rolling on the creep properties of FeCrAl alloy was investigated using a nano-indentation creep test under a temperature of 350°C. The microanalysis results indicated that the grain size became smaller with the increase of the hot-rolling thickness reduction. The nano-indentation creep test results showed that the creep power-law stress exponent was about four, and the creep resistance increased when the hot-rolling thickness reduction increased.

Abstract licence: CC BY

References22

    22 more references, whose wording the paper’s licence keeps private.

    Reads

    Read by people on this page

    None yet.

    Checked or read by AI through naulon

    None yet.

    A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.

    Are you an author?

    Is this your paper?

    Claim it to add your note and be paid when agents cite it. Free.