Skip to content
naulon
Not checkedNot checked for notices yet.

Avaria by the bottom of a bolt on a diesel of engine

Negoita O., Chivu Oana, Babis C and 6 more

Journal of Research and Innovation for Sustainable Society · 2019

doi:10.33727/jriss.2019.1.2:13-20 (opens in a new tab)

We email you when a new notice or a question about this paper appears.

Abstract

A drive from a diesel engine of a truck was broken into four parts during normal use. Damaged bolt caused longitudinal and transverse cracks. They started from the surface of the hole and stretched outward. The appearance of marginal signs and striations on the surfaces of all regions of origin of the crack indicate that fatigue breakage is the dominant damaging mechanism of the bolt. The surface of the hole and the outer surface are indicated to be cemented. Microstructure and microstructure profiles at the bolt surface and in the regions of the hole surface were examined to determine the thickness of the cementitious layer. However, not only there was no cementitious layer found on the surface of the hole, but also a serious decarburization occurred in the area. The appearance of decaying the surface of the hole greatly decreases the fatigue strength of this area, so the crack has started from the surface of the hole and stretched to the outer circle, eventually opening the tear. Inappropriate cementing technology is responsible for decarburation of the surface of the hole.

Abstract licence: CC BY

Reads

Read by people on this page

None yet.

Checked or read by AI through naulon

None yet.

A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.

Are you an author?

Is this your paper?

Claim it to add your note and be paid when agents cite it. Free.