A NEW MIMO SLOT ANTENNA FOR 5G APPLICATIONS
Arwa Abdulkareem Hamad, Malik Jasim Farhan
Journal of Engineering and Sustainable Development · 2020
doi:10.31272/jeasd.24.6.3 (opens in a new tab)
We email you when a new notice or a question about this paper appears.
Abstract
A new MIMO slot antenna is proposed in this paper, the proposed antenna consists of tuning stub with certain dimensions in the top layer of the FR-4 dielectric substrate to increase the matching between the feed line and slot in the ground plane, this antenna feeds with 50-ohm characteristic impedance microstrip feed line. The dimensions of the proposed antenna are (50×50×1.6) mm2, the FR-4 epoxy substrate has a relative dielectric constant of ɛr=4.3, the tangent loss of tan (δ) =0.025. A bandwidth of 9.083 GHz (25.917–35) GHz and gain (6.33) dBi compatible with 5G applications are achieved with this antenna. To get the desired gain and bandwidth, several slots are etched on the ground, Using CST tools, the simulation results are collected. And the proposed antenna is manufactured in the Ministry of Science and Technology's- Electronic Manufacturing Center, a reasonable agreement is reached between simulation and measured performance.
Abstract licence: CC BY
Reads
Read by people on this page
None yet.
Checked or read by AI through naulon
None yet.
A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.
Are you an author?
Is this your paper?
Claim it to add your note and be paid when agents cite it. Free.