Skip to content
naulon

Not checkedNot checked for notices yet.

STRUCTURAL BEHAVIOR OF STEEL-CONCRETE-STEEL SANDWICH STRUCTURE WITH NEW TYPE OF SHEAR CONNECTORS

Hayhder A. Abdul Razzaq, Nabeel A. Jasim

Mağallaẗ Al-kūfaẗ Al-handasiyyaẗ · 2019

doi:10.30572/2018/kje/100303 (opens in a new tab)

We email you when a new notice or a question about this paper appears.

Abstract

The aim of the current research is to investigate the structural behavior of steel-concrete-steel sandwich beams with a new suggested shear connectors. The shear connector was manufactured from deformed rebar in the form of stirrups. Four push out specimens were tested to obtain direct shear strength for the new type of shear connectors. Also four full size steel-concretesteel sandwich beams were tested under three points loading. All beams were simply supported. The experimental results showed three failure modes as follow: (1) flexural failure; (2) shearing of shear connectors; and (3) buckling in compression plate. The use of proposed shear connectors from deformed steel bars produces a good connection between steel plates and concrete core, where the load capacity of steel-concrete-steel beam with long leg stirrups (L. connector) is larger than other beams. The ultimate load of beam B1 (steel-concrete-steel sandwich beam with L. connector) is 0.125 greater than the ultimate load of beam B2 (steelconcrete-steel sandwich beam with J-hook connectors).

Abstract licence: CC BY

Reads

Read by people on this page

None yet.

Checked or read by AI through naulon

None yet.

A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.

Are you an author?

Is this your paper?

Claim it to add your note and be paid when agents cite it. Free.