Reduced-Size Series-Fed Two-Dipole Endfire Antenna
Heesu Wang, Yong Bae Park, Ikmo Park
Journal of Electromagnetic Engineering and Science · 2022
doi:10.26866/jees.2022.5.r.123 (opens in a new tab)
We email you when a new notice or a question about this paper appears.
Abstract
The conventional series-fed endfire dipole antenna has a wide impedance bandwidth and is inexpensive to manufacture. However, it has a disadvantage: its size is large because of the large inter-dipole spacing, which is required to satisfy the endfire condition for good antenna radiation characteristics. Here, we propose a two-dipole endfire antenna with a reduced size. The miniaturized endfire antenna was designed using a meander line to reduce the interdipole spacing while ensuring that the endfire condition was satisfied. Furthermore, the overall width of the antenna was reduced using a bent dipole and a corrugated ground plane. The electrical size of the proposed antenna was only 0.33λo × 0.33λo × 0.014λo at a center frequency of 5 GHz, its −10 dB impedance bandwidth was 4.47–5.72 GHz (24.5%), and the gain at the center frequency was 5.9 dBi.
Abstract licence: CC BY-NC
Reads
Read by people on this page
None yet.
Checked or read by AI through naulon
None yet.
A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.
Are you an author?
Is this your paper?
Claim it to add your note and be paid when agents cite it. Free.