Skip to content
naulon

Not checkedNot checked for notices yet.

DETERMINATION OF COPPER AT WIDE RANGE CONCENTRATIONS USING INSTRUMENTAL FEATURES OF HIGH-RESOLUTION CONTINUUM SOURCE FLAME ATOMIC ABSORPTION SPECTROMETRY

Renata Toledo Lima, Jorge Luiz Raposo Júnior, Alex Virgílio and 1 more

Eclética Química · 2018

doi:10.26850/1678-4618eqj.v35.4.2010.p87-92 (opens in a new tab)

We email you when a new notice or a question about this paper appears.

Abstract

This work describes a method to determine Cu at wide range concentrations in a single run without need of further dilutions employing high-resolution continuum source flame atomic absorption spectrometry. Different atomic lines for Cu at 324.754 nm, 327.396 nm, 222.570 nm, 249.215 nm and 224.426 nm were evaluated and main figures of merit established. Absorbance measurements at 324.754 nm, 249.215 nm and 224.426 nm allows the determination of Cu in the 0.07 – 5.0 mg L-1, 5.0 – 100 mg L-1 and 100 – 800 mg L-1 concentration intervals respectively with linear correlation coefficients better than 0.998. Limits of detection were 21 μg L-1, 310 μg L-1 and 1400 μg L-1 for 324.754 nm, 249.215 nm and 224.426 nm, respectively and relative standard deviations (n = 12) were £ 2.7%. The proposed method was applied to water samples spiked with Cu and the results were in agreement at a 95% of confidence level (paired t-test) with those obtained by line-source flame atomic absorption spectrometry.

Abstract licence: CC BY

Reads

Read by people on this page

None yet.

Checked or read by AI through naulon

None yet.

A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.

Are you an author?

Is this your paper?

Claim it to add your note and be paid when agents cite it. Free.