Skip to content
naulon
Not checkedNot checked for notices yet.

COMPARISON OF THE EFFICIENCY OF DIFFERENT DETECTORS OF THE SCANNING ELECTRONIC MICROSCOPE «MIRA-LMH» FOR STUDYING MICROSTRUCTURE OF NANOMATERIALS

D.S. Kuleshov, A.V. Blinov, А.A. Blinova and 3 more

Физико-химические аспекты изучения кластеров, наноструктур и наноматериалов · 2021

doi:10.26456/pcascnn/2021.13.250 (opens in a new tab)

We email you when a new notice or a question about this paper appears.

Abstract

At the first stage, the objects of study were synthesized – silicon dioxide by the Stober method, where tetraethoxysilane was used as a precursor, and a nanocomposite ZnO-Au by the sol-gel method using the aqueous zinc acetate dihydrate as a precursor. At the second stage, the microstructure and morphology of the obtained samples were investigated by scanning electron microscopy on a «MIRA-LMH» scanning electron microscope (Tescan company) using both a classical secondary electron detector and additional detectors – intralens secondary electron detector and back-scattered electrons detector. As a result of the research, it was found that when using the secondary electron detector, practically no noise images with topographic contrast are obtained. When using the intralens secondary electron detector, images of only material contrast are created, without the influence of the surface relief. Also, the use of this detector made it possible to obtain high-quality images with a high resolution at a distance of 5 mm from the sample. When using a back-scattered electrons detector with a working distance to the sample of 8 mm and increasing the resolution of the microscope, the resulting images have low border contrast, but represent compositional information with high sensitivity. Thus, it was found that the intralens secondary electron detector with a working distance of 5 mm to the sample is optimal for obtaining clear images of the microstructure of the surface of nanomaterials at multiple magnifications.

Abstract licence: CC BY-NC-ND

Reads

Read by people on this page

None yet.

Checked or read by AI through naulon

None yet.

A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.

Are you an author?

Is this your paper?

Claim it to add your note and be paid when agents cite it. Free.