Skip to content
naulon
Not checkedNot checked for notices yet.

Prediction of asphaltene precipitation upon injection of various gases at near-wellbore conditions: A simulation study using PC-SAFT EoS

Mahmoudvand Saba, Shahsavani Behnam, Parsaei Rafat and 1 more

Oil & Gas Science and Technology · 2019

doi:10.2516/ogst/2019037 (opens in a new tab)

We email you when a new notice or a question about this paper appears.

Abstract

The depletion of oil reservoirs and increased global oil demand have given impetus to employ various secondary and tertiary oil recovery methods. Gas injection is widely used in both secondary and tertiary modes, though the major problem associated with this process is the precipitation and deposition of asphaltene, particularly at near-wellbore conditions. In-depth knowledge of asphaltene phase behavior is therefore essential for the prediction of asphaltene precipitation. Previous studies reported the impact of gas injection on asphaltene phase behavior, but the knowledge of precipitation of asphaltene as a function of different mole fractions of injected gas is also imperative. In this study, the thermodynamic model of PC-SAFT EoS is used to discern the phase equilibrium of asphaltene by analyzing the asphaltene drop-out curve during gas injection. Asphaltene drop-out curves of two different live oil samples are analyzed by injecting CO 2 , CH 4 , and N 2 gases at different mole percentages and temperatures. The results revealed that PC-SAFT EoS can serve as a reliable tool for estimating bubble pressure and asphaltene onset pressure for a wide range of temperatures, pressures, and compositions. The simulation results for the injection of CO 2 , CH 4 , and N 2 also showed that CO 2 gas gives minimum asphaltene precipitation. It reduces the size of the drop-out curve or moves it toward higher pressures. CH 4 and N 2 expand the drop-out curve by raising the upper onset point. CH 4 increases the maximum point of the drop-out curve for two types of oil studied (A and B) at two different temperatures. N 2 raises the maximum point of oil type “A” by approximately 57% at 395 K, while it has no effect on the maximum point of oil type “B”. In addition, reducing the temperature resulted in either decrease or increase of asphaltene solubility, demonstrating that the impact of temperature on asphaltene precipitation is closely related to the composition of the crude.

Abstract licence: CC BY

References47

    47 more references, whose wording the paper’s licence keeps private.

    Reads

    Read by people on this page

    None yet.

    Checked or read by AI through naulon

    None yet.

    A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.

    Are you an author?

    Is this your paper?

    Claim it to add your note and be paid when agents cite it. Free.