Effect of the Tower Type on the Gas Sweetening Process

The removal of acid gases, CO2 and H2S from natural gas streams is essential for environmental and health reasons. In this work, the simulated gas sweetening unit with Methyl-DiEthanolAmine (MDEA) solvent was studied to improve quality. Firstly, the effect of trays types and then, the effect of various packing and the effect of the packing size were considered on the flow rate of CO2 and H2S in the main streams. Results show that with considering the different trays types in the regenerator tower, the flow rate of CO2 in the sweet gas stream with bubble cap tray is lower than other trays types. Also, with considering the different trays types in the absorber tower, the flow rate of CO2 in the sweet gas stream with bubble cap tray is lower than other trays types in the absorber tower. In considering with different types of packing, results show that the flow rate of CO2 with ballast ring packing and the flow rate of H2S with Raschig ring packing are lower than other types of packing. However, in some types such as cascade miniring, Intalox Saddles and pall ring, there is no difference for the flow rate of CO2 or H2S. In all cases, with increasing the size of the packing, the flow rate of CO2 and H2S in the sweet gas stream increases, however, this increasing in the metal packing is very small.

Abstract licence: CC BY

A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.