Skip to content
naulon
Not checkedNot checked for notices yet.

Improving the eNodeB Coverage of a Bad Spot Area by Using A Relay Node

Fivie Ni'mah, Hasanah Putri Putri

IJAIT (International Journal of Applied Information Technology) · 2018

doi:10.25124/ijait.v2i02.1391 (opens in a new tab)

We email you when a new notice or a question about this paper appears.

Abstract

The quality of LTE (Long Term Evolution) network in WR Supratman Street, Bandung is categorized as quite bad as shown by the average RSRP (Reference Signal Receive) and SINR (Signal to Interference Noise Ratio) values of -101.30 dBm and 2.43 dB, respectively. Both parameters are below the standard operator with the average RSRP and SINR standard values of -101.30 dBm and 2.43 dB, respectively. The previous field measurement indicated that the area belonged to a bad spot area caused by shadowing buildings. This study used the node scheme of decode and forward and physical mode of inband relay node with the aim of extending the eNodeB coverage. By applying this technique, the average RSRP value increased by 18% and the average SINR value increased by 53%. Based on the RF (Radio Frequency) parameters, the average RSRP value with samples below the -85 dBm standard improved by 81%, while the average SINR value with samples below 5 dB improved by 45%.

Abstract licence: CC BY-NC

Reads

Read by people on this page

None yet.

Checked or read by AI through naulon

None yet.

A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.

Are you an author?

Is this your paper?

Claim it to add your note and be paid when agents cite it. Free.