Skip to content
naulon
Not checkedNot checked for notices yet.

The Use of Polyethylene Terephthalate Waste for Modifying Asphalt Concrete Using the Marshall Test

Ogundipe Olumide Moses

Slovak Journal of Civil Engineering · 2019

doi:10.2478/sjce-2019-0010 (opens in a new tab)

We email you when a new notice or a question about this paper appears.

Abstract

This study considers the use of polyethylene terephthalate (PET) waste for modifying asphalt concrete. In the study, the optimum bitumen content of asphalt concrete was replaced with 4%, 6%, 8%, 10%, 12%, 14% and 16% of PET waste; the Marshall test was conducted on the samples. A comparison of the unmodified and PET-modified asphalt concrete showed that the stability of the modified asphalt concrete was reduced. The maximum stability for the PET waste-modified asphalt concrete was recorded at a content of 12% PET waste. This gives about a 20.4% reduction in stability. The study reveals that the addition of PET waste to the asphalt concrete causes a reduction in the flow value except with the addition of 14% and 16 % waste. This implies that the introduction of PET waste could improve the permanent deformation resistance of asphalt, although there is concern about a reduction in fatigue resistance.

Abstract licence: CC BY

Reads

Read by people on this page

None yet.

Checked or read by AI through naulon

None yet.

A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.

Are you an author?

Is this your paper?

Claim it to add your note and be paid when agents cite it. Free.