Skip to content
naulon
Not checkedNot checked for notices yet.

Liquid Film Thickness Estimation using Electrical Capacitance Tomography

Cui Ziqiang, Yang Chengyi, Sun Benyuan and 1 more

Measurement Science Review · 2014

doi:10.2478/msr-2014-0002 (opens in a new tab)

We email you when a new notice or a question about this paper appears.

Abstract

In air/oil lubrication systems, the flow parameters, e.g., flow pattern, liquid film thickness, and air/oil flow rate, are of great importance to the transportation efficiency. In most cases, the on-going two-phase flow is annular flow with the oil moving along the tube wall and the air travelling at high speed in the center. This usually results in the formation of a thin oil film, the thickness of which is a key parameter determining the efficiency of the lubrication system. As the oil film thickness of the on-going air/oil flow varies dynamically, there is actually no applicable method for a non-intrusive test. In this paper, the use of electrical capacitance tomography (ECT) to investigate the air/oil flow has been studied. Capacitance measurements are made from an externally mounted electrode array in a non-invasive and non-intrusive manner. Both average and distributed oil film thicknesses can be calculated from the reconstructed ECT images. Simulation and experimental results show that the ECT technique can provide satisfactory results of online oil film thickness estimation

Abstract licence: CC BY-NC-ND

Reads

Read by people on this page

None yet.

Checked or read by AI through naulon

None yet.

A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.

Are you an author?

Is this your paper?

Claim it to add your note and be paid when agents cite it. Free.