Skip to content
naulon
Not checkedNot checked for notices yet.

Verification of CFD analysis methods for predicting the drag force and thrust power of an underwater disk robot

Joung Tae-Hwan, Choi Hyeung-Sik, Jung Sang-Ki and 2 more

International Journal of Naval Architecture and Ocean Engineering · 2014

doi:10.2478/ijnaoe-2013-0178 (opens in a new tab)

We email you when a new notice or a question about this paper appears.

Abstract

This paper examines the suitability of using the Computational Fluid Dynamics (CFD) tools, ANSYSCFX, as an initial analysis tool for predicting the drag and propulsion performance (thrust and torque) of a concept underwater vehicle design. In order to select an appropriate thruster that will achieve the required speed of the Underwater Disk Robot (UDR), the ANSYS-CFX tools were used to predict the drag force of the UDR. Vertical Planar Motion Mechanism (VPMM) test simulations (i.e. pure heaving and pure pitching motion) by CFD motion analysis were carried out with the CFD software. The CFD results reveal the distribution of hydrodynamic values (velocity, pressure, etc.) of the UDR for these motion studies. Finally, CFD bollard pull test simulations were performed and compared with the experimental bollard pull test results conducted in a model basin. The experimental results confirm the suitability of using the ANSYS-CFX tools for predicting the behavior of concept vehicles early on in their design process.

Abstract licence: CC BY-NC-ND

Reads

Read by people on this page

None yet.

Checked or read by AI through naulon

None yet.

A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.

Are you an author?

Is this your paper?

Claim it to add your note and be paid when agents cite it. Free.