Skip to content
naulon
Not checkedNot checked for notices yet.

CFD as a seakeeping tool for ship design

Sungeun Peter Kim

International Journal of Naval Architecture and Ocean Engineering · 2011

doi:10.2478/ijnaoe-2013-0046 (opens in a new tab)

We email you when a new notice or a question about this paper appears.

Abstract

Seakeeping analysis has progressed from the linear frequency-domain 2D strip method to the nonlinear time-domain 3D panel method. Nevertheless, the violent free surface flows such as slamming and green water on deck are beyond the scope of traditional panel methods based on potential theory. Recently, Computational Fluid Dynamics (CFD) has become an attractive numerical tool that can effectively deal with the violent free surface flows. ABS, as a classification society, is putting forth a significant amount of effort to implement the CFD technology to the advanced strength assessment of modern commercial ships and high-speed naval craft. The main objective of this study is to validate the CFD technology as a seakeeping tool for ship design considering fully nonlinear three-dimensional slamming and green water on deck. The structural loads on a large container carrier were successfully calculated from the CFD analysis and validated with segmented model test measurements.

Abstract licence: CC BY-NC-ND

Reads

Read by people on this page

None yet.

Checked or read by AI through naulon

None yet.

A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.

Are you an author?

Is this your paper?

Claim it to add your note and be paid when agents cite it. Free.