Friction and Wear Characteristics of Molybdenum Dithiocarbamate with Alloy Steels
Hiroyoshi Tanaka, Masaaki Hashimoto, Seigo Gondo and 1 more
Tribology Online · 2006
doi:10.2474/trol.1.9 (opens in a new tab)
We email you when a new notice or a question about this paper appears.
Abstract
The effects of composition of alloy steel on the friction and wear characteristics of molybdenum dithiocarbamate MoDTC were studied in reciprocated sliding contact using a ball-on-plate type tester. The oil used was squalane of a pure hydrocarbon. The excellent friction and wear characteristics were obtained with high speed steel M50 containing Mo at 4.25 and Cr at 4.12 mass % and bearing steel SUJ2 containing Cr at 0.45 mass %. Especially, M50 with high Mo and Cr content used as the upper ball specimen gave a very low coefficient of friction. A MoO3 surface film formed in advance was confirmed to be effective in improving the friction and wear characteristics of MoDTC.
Abstract licence: CC BY-NC-ND
References13
13 more references, whose wording the paper’s licence keeps private.
Reads
Read by people on this page
None yet.
Checked or read by AI through naulon
None yet.
A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.
Are you an author?
Is this your paper?
Claim it to add your note and be paid when agents cite it. Free.