Skip to content
naulon

Not checkedNot checked for notices yet.

Microstructure Evolution and Wear Resistance of Boron-Bearing High Speed Steel Roll

Cheng Xiaole, Hou Jianqiang, Fu Hanguang

Archives of Metallurgy and Materials · 2022

doi:10.24425/amm.2022.137479 (opens in a new tab)

We email you when a new notice or a question about this paper appears.

Abstract

The microstructure evolution of boron-bearing high speed steel roll materials after casting and tempering was investigated. The results indicate that as-cast boron-bearing high speed steel consists of martensitic matrix, retained austenite and different borocarbides. The as-cast alloy has a hardness above 64 HRC, and the borocarbides distribute along the grain boundaries. After RE-Mg-Ti compound modification treatment, obvious necking and broken network appear in the grain boundaries. The hardness of boron-bearing high speed steel roll materials reduces gradually with the increase of tempering temperature. Under the same conditions, the toughness of the modified roll material is higher than that of the unmodified roll material. Wear tests show that the wear resistance of boron-bearing high-speed steel modified by RE-Mg-Ti compound modification treatment is better.

Abstract licence: CC BY

Reads

Read by people on this page

None yet.

Checked or read by AI through naulon

None yet.

A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.

Are you an author?

Is this your paper?

Claim it to add your note and be paid when agents cite it. Free.