Skip to content
naulon
Not checkedNot checked for notices yet.

An Attempt to Use Various Metallurgical Slags in the Modification Processes of Casting Alloys

J. Sitko

Archives of Metallurgy and Materials · 2021

doi:10.24425/amm.2021.136426 (opens in a new tab)

We email you when a new notice or a question about this paper appears.

Abstract

The paper presents preliminary results of research on the use of certain smelting slags in the process of modification of casting alloys, leading to a change in the structure of these alloys and improvement of their mechanical and operational properties. The positive effect of ground copper slag with a fraction below 0.1 mm on the effect of modifying the hypoeutectic silumin AlSi7Mg towards changing the morphology of coarse-grained eutectic to fine-dispersive was demonstrated. The modifying effect also applies to the pre-eutectic α phase and results in the formation of additional crystallization sites (nucleation process), which was demonstrated by the thermal ATD solidification analysis, showing an increase in the temperature Tliq and TEmax. The positive and noticeable influence of the mixture of copper and steel slag on the surface modifying effect of fragmentation of the structure was demonstrated in casting nickel superalloy IN-713C. Based on the results of research conducted so far on the modifying effect of cobalt aluminate, a hypothetical model of the impact of reduced metallic components of the applied metallurgical slags on the nucleation process and shaping of the microstructure of nickel alloys was developed.

Abstract licence: CC BY

Reads

Read by people on this page

None yet.

Checked or read by AI through naulon

None yet.

A person counts once a day per paper. We keep no cookie and no address: a reader is a hash that changes every day. Any month under five reads shows no number.

Are you an author?

Is this your paper?

Claim it to add your note and be paid when agents cite it. Free.